In short:
- Empty the safe, close and lock it, and find out what it weighs before anyone quotes to move it.
- A heavy safe is a job for movers with the right equipment, not a few friends and a trolley.
- An unbolted safe is far easier to carry off. Plan where it goes in the new home and how it will be anchored to that floor.
- Gun safes must keep a facility for being securely fixed to a wall or floor under the firearms regulations.
- Change the code or lock once the safe is in place: more people than usual have handled it.
First, know what you're dealing with
Home safes range from small boxes you could carry under one arm to fire-rated cabinets that need several people and proper equipment. A moving guide from HireAHelper puts typical safes anywhere from about 45 kg to well over 450 kg, and recommends specialist help for the heavier ones and for awkward routes such as spiral stairs.
Before you ask for quotes, gather the basics:
- The make and model, usually on a plate inside the door or on the back.
- The weight, from the maker's label, manual or website. If you can't find it, say so; don't guess low.
- Outside measurements, including the depth with the handle, and the diagonal if it has to tilt through a doorway.
- How it's fixed: bolted to the floor, to a wall, both, or not at all.
- The route out: steps, narrow passages, tiled or wooden floors, and the driveway surface.
Who should move it
We open and repair safes, but we don't transport them. For anything heavier than a small box safe, use a removal company that moves safes routinely, or a specialist heavy-item mover. Ask them directly what equipment they'll bring (a rated safe trolley, a stair-climber, floor protection) and send them the measurements and photos of the route.
| Situation | Usual approach |
|---|---|
| Small box safe, ground floor, short route | Can often go with your general removal, packed and carried like a heavy box |
| Mid-sized safe, a few steps | Removal crew with a proper safe trolley and enough people |
| Large safe, stairs, or an upper-floor flat | Specialist movers with stair-climbing equipment; check the floor and the lift |
| Built-in or floor-cast safe | Probably stays with the house; agree that in the sale agreement |
HireAHelper's advice is simple and worth repeating: never move a safe full of contents, and close and lock the door before it's wrapped so it can't swing open on a hand. Keep the code and keys with you, not packed in a box on the truck.
Getting it off its anchor bolts
A bolted safe is usually fixed through holes in its base, sometimes its back, with expansion anchors into concrete or brickwork. The bolt heads are inside the safe, under a floor panel or behind caps, so they can only be reached with the door open. That's deliberate: an anchored safe is much harder to carry away. As one safe supplier puts it, a safe is only as secure as its fastening.
- Open the safe and lift the floor panel or caps to see how many fixings there are.
- Take a photo before anything is removed, so you know what was there.
- Expect the anchors to stay in the floor. Plan to have them cut flush or the holes filled once the safe has gone, especially if you're selling.
If the safe won't open because the code has gone or the lock has failed, sort that out before moving day. That's a safe opening job, and we'll ask for proof of ownership and try non-destructive methods first.
The floor at the new home
The floor decides both where the safe can go and how well it can be anchored. Concrete gives anchors something solid to grip; hollow or timber floors don't. A concentrated load is also a consideration on upper floors.
- Ground floor on a slab (most newer homes): the usual choice. Avoid anchoring right next to slab edges or cracks.
- Tiles over screed: fine, but the tiler's or builder's advice on drilling helps avoid cracked tiles and hidden pipes.
- Timber floor: anchoring needs a different approach, such as fixing to a wall as well; get a builder's opinion.
- Upper-floor apartment: check with the body corporate about moving heavy items, using the lift and drilling into the slab.
Choose a spot where the door can open fully, out of sight of windows, and away from where water collects. Measure that the safe fits before the movers arrive.
Gun safes: the extra rules
The Firearms Control Regulations require a licence holder's firearms and ammunition, when not under their direct control, to be stored in a safe or strong-room that conforms to SABS Standard 953-1 and 953-2, unless the regulations provide otherwise. For lock-away safes, regulation 86(12) lists requirements including a facility that allows the safe to be securely affixed to a structure such as a wall or a floor.
Practically, that means a gun safe should be re-anchored at the new home, not left standing loose in a cupboard. Plan the firearms' storage during the move too: they shouldn't be sitting in an unlocked box in a removal truck. If you're unsure what applies to your licence, ask your Designated Firearms Officer at the local SAPS station.
Change the code after the move
During a move, more people than usual see the safe, handle its keys or overhear its code: movers, previous owners if the safe came with a house, family helping you pack. Treat it like moving into a house where you don't know who has keys.
- Electronic locks: most let the owner change the user code with the existing code, following the maker's manual. Fit fresh batteries at the same time.
- Mechanical combination locks: changing the combination usually needs the maker's procedure and a change key, and a mistake can lock you out. This is a sensible job to hand over.
- Key-locked safes: if keys have been out of your sight, consider having the lock changed. We don't cut copies of safe keys.
Problems after the move, and what to send us
Safes are tough, but a knock in transit or a floor that isn't quite level can show up as a door that rubs, a handle that turns but doesn't withdraw the bolts, or an electronic lock that beeps and won't open. Our article on a safe handle that turns but the door stays shut covers that symptom. Faults with the door, lock or bolt work are for safe repairs.
- A photo of the safe and its make and model plate.
- What happened, and when: during the move, or since.
- Whether it's open or locked, and whether you have the code and keys.
- Proof of ownership for the safe and proof of residence for the address.
Moving into an apartment brings stairs, lifts and body-corporate rules into the plan; a property guide for Paardevlei describes homes from modern apartments to secure estate homes. Larger freehold homes, like the spacious family homes described in Heldervue, tend to have more choice of a ground-floor slab. We're open 24/7, the R350 call-out fee. The technician assesses the job on site and gives you the price before any work starts. Nothing is done until you agree. Payment is by EFT, cash or card. If you're also selling, our lock checklist before you sell covers what happens to a safe you leave behind. For everything else, visit our mobile locksmith in Somerset West homepage.
Questions
Can I just leave the safe unbolted at the new house?
You can, but a loose safe is much easier to carry off and open elsewhere. Anchoring it to the floor, and to a wall where the maker allows, is what makes it a safe rather than a heavy box. For gun safes, the regulations expect a fixing facility to be there and used.
Should I leave things inside the safe while it's moved?
No. Empty it first. Contents add weight, shift about and can damage the inside, and you don't want valuables, documents or firearms travelling in a truck out of your control.
The safe was dropped during the move and now won't open. What now?
Don't keep forcing the handle. Note what happens when you enter the code or turn the key and send us photos. We'll ask for proof of ownership, try non-destructive methods first and quote on site before any work.
Need a locksmith to look at it?
If this hasn't solved the problem, our safe repairs & code changes service covers it. We're a mobile locksmith in Somerset West, so we come to your door. Areas where this comes up often include Paardevlei, Heldervue.
Sources and further reading
- Acts Online: Firearms Control Regulations, regulation 86 (safes and safe custody) — Firearms not under the holder's direct control to be stored in a safe or strong-room conforming to SABS 953-1 and 953-2; lock-away safes must have a facility to be securely affixed to a wall, floor or vehicle body (reg 86(12)(e)).
- HireAHelper: How to move a heavy safe — Safes can weigh from about 100 lb to over 1,000 lb; empty the safe and lock the door before moving; measure doorways and diagonals; protect floors; consider professionals for heavy safes and spiral stairs.
- Safe and Vault Store: How to install concrete anchor bolts — A safe is only as secure as its fastening; bolting into concrete stops the whole safe being removed.
- myproperty: Paardevlei and Heldervue area guides — Paardevlei: homes from modern apartments to secure estate homes. Heldervue: established gardens and spacious family homes (https://www.myproperty.co.za/en-za/property/western-cape/somerset-west/heldervue).