In short:
- Fresh paint glues latches, fills strike plates and bridges the gap between door and frame. Hardware should come off before painting and go back only once the paint is fully dry.
- Plaster, cement and sanding dust work into cylinders and latches, and oily sprays turn that dust into paste.
- New tiles, thicker flooring or a planed door change how the door hangs, so a healthy lock stops meeting its strike.
- Builders, painters and tilers held your keys and codes. Rekeying or changing the cylinders once they've gone is sensible housekeeping.
Why locks act up when the builders leave
A renovation touches far more than the room being worked on. Doors are taken off and rehung, frames are filled and painted, floors rise by the thickness of a tile and its adhesive, and fine dust settles in every opening, including keyholes. None of that is the lock's fault, but the lock is where you notice it: a key that grates, a latch that won't spring back, a deadbolt that only throws if you lean on the door.
The good news is that most post-renovation lock trouble is a fit or cleanliness problem, not a broken lock. The bad news is that it gets worse if it's forced. ASSA ABLOY's care guidance points out that faulty hinges, warped doors and distorted frames put excessive load on other components and shorten their life, which is exactly what a misaligned door does to a lock every time it's slammed shut.
Paint where it shouldn't be
- Painted-in latch. A brush stroke across the latch bolt dries into a skin that stops it springing back.
- Filled strike plate. Paint or filler in the strike's opening leaves the latch or bolt nowhere to go.
- Bridged gap. Paint on the door edge and the frame rebate bonds them when the door is closed too soon.
- Painted hinges. Stiff hinges drag the door off line.
- Paint in the keyhole. Spray or drips on a cylinder face can enter the keyway.
Painting guides agree on the fix, which is prevention: take the knob, lock and hinges off before painting where you can, keep paint off door hardware, and put the hardware back only once the paint is fully dry. If paint has already landed on a lock face, ASSA ABLOY's guidance is to use the weakest possible solvent (it names methylated spirits, white spirits or isopropanol), keep contact time short, test a small area first and rinse it off, and not to let cleaning fluids get into the lock or cylinder. Polishes like Brasso strip the lacquer from brass hardware, so avoid them.
Dust: the quiet problem
Sanding drywall, chasing walls for wiring and cutting tiles throw fine dust into the air, and a cylinder's keyway is a small, open slot. The usual reaction is to spray in an all-purpose oil. That's the step that turns a dusty lock into a stuck one: ASSA ABLOY warns that too much lubricant attracts dust and shortens component life, and that silicone-based lubricants go tacky. For its own cylinders it recommends removing grime around the cylinder end and using a small amount of graphite powder on the key. Other makers specify different products, so follow the guidance for your lock rather than any universal fix.
If a key grates or needs force after building work, stop. A key twisted against a gritty cylinder is how keys snap, and then you need broken-key extraction as well.
When the door no longer hangs true
When new tiles or a thicker floor go down, a door that now scrapes is often trimmed or lifted on its hinges. Each change moves the latch and deadbolt relative to the strike plates on the frame. A millimetre or two is enough for a latch to catch the lip of the strike, or for a deadbolt to bind so the key only turns with the door pushed or pulled.
| Symptom | Likely cause | Usually fixed by |
|---|---|---|
| Key turns easily with the door open, hard when closed | Bolt rubbing on the strike: alignment | Adjusting the strike or the door hang |
| Door scrapes the new floor | Floor height changed | Your carpenter or tiler, before the lock is touched |
| Latch won't spring back out | Paint on the latch, or dust inside | Careful cleaning; a lock repair if it's damaged |
| Key grates or sticks | Dust or paint in the cylinder | Cleaning per the maker's guidance, or a new cylinder |
| Multipoint handle stiff after rehanging | Locking points missing their keeps | Adjusting the door and keeps |
Safe checks before you call
- Test with the door open. If the key, latch and deadbolt all work smoothly with the door open, the lock is fine and the problem is the fit.
- Look for rub marks on the strike plate and the latch. Shiny scuffs show where they're catching.
- Check the strike opening for paint, filler or plaster.
- Check the gaps around the door: uneven gaps mean it has moved or dropped.
- Don't file the strike or the bolt to make it catch. It hides the fault and weakens the lock.
- Don't spray oil into a dusty lock.
Builders' keys: rekey once the work is done
During a renovation your keys, gate remote and possibly your alarm code pass through several hands: the main contractor, the painter, the tiler, the electrician, their staff. Almost everyone is honest, but you can't know where every key went or whether someone made a copy. Once the last contractor leaves:
- Collect every key and remote you handed out, and count them.
- Change any alarm user codes, lockbox codes and keypad codes the builders used.
- Ask the estate or complex to cancel contractor access tags and permits, as their rules require.
- Have the outside doors rekeyed, or the cylinders changed, so old keys no longer work.
We don't cut or copy keys, so new cylinders arrive with their own keys from the maker. Refurbishing is part of owning an established home, whether it's an older property near the town centre (Somerset West itself dates from 1822) or a house in Helderberg Village, a retirement village that has been there for nearly four decades. In Somerset West Central or anywhere else in town, the same approach applies.
Getting it sorted in one visit
List every door that's misbehaving, take photos of the lock edge and the strike on the frame, and note what changed: new floor, repainted frames, a rehung door. Our lock repair service handles alignment, strikes, latches and cylinders; where a lock has been damaged or you want new cylinders after the builders, see lock replacement. The R350 call-out applies and the technician quotes on site before any work, with payment by EFT, cash or card. Selling once the work's done? Locks to check before you sell your home is the next read, and locks for French doors and stable doors covers two door types that renovations often add. More at our Somerset West mobile locksmith homepage.
Questions
Can I just spray lubricant into the lock after the painters leave?
Better not. Excess lubricant holds dust, and silicone-based sprays go tacky. Clean dust from around the cylinder, and use only the product your lock's maker recommends.
Should I really change the locks after a renovation?
If keys went to several contractors, rekeying or new cylinders is sensible. It's a one-off cost against not knowing who still holds a key.
The door only locks if I lift the handle hard. Is the lock broken?
Probably not. That usually means the door has dropped or shifted and the bolts are rubbing on the strikes or keeps. Forcing it every day is what eventually breaks the lock, so have the alignment sorted.
Need a locksmith to look at it?
If this hasn't solved the problem, our lock repairs service covers it. We're a mobile locksmith in Somerset West, so we come to your door. Areas where this comes up often include Somerset West Central, Helderberg Village.
Sources and further reading
- ASSA ABLOY South Africa: Product care and maintenance — Faulty hinges, warped doors and distorted frames overload other components; weakest possible solvent (methylated spirits, white spirits or isopropanol), test area first, keep fluids out of the lock; Brasso removes lacquer; excess lubricant attracts dust; avoid silicone-based lubricants; graphite powder for its cylinders.
- Bob Vila: How to paint a door — Remove the knob, lock and hinges before painting; avoid paint on door hardware; replace hardware only once the paint is fully dry.
- Wikipedia: Somerset West — Somerset West was founded in 1822; Main Road photographed in 1909.
- Estate Living: Helderberg Village — Retirement village established nearly four decades ago, just outside Somerset West.